Project Title: Vilter Screw Compressor Microprocessor Upgrade
Project #: 291-6326-18
Issued by: Oregon Department of Corrections
Publish Date: 1/12/2018
Due Date: 1/19/2018 This opportunity has closed.

view original RFP open original RFP in new window


The Oregon Department of Corrections is awarding an order to Apcco, 3501 Brooklake Rd., Salem, OR 97303 under Special Procurement Rule OAR 125-247-0288 (5). Order value is $50,870.00 for a Vilter Screw Compressor Microprocessor upgrade. Scope of Work Shut down, isolate, and remove the R-22 gas as required to install a new Frick Quantum on each Compressor Package (2 Total) Installation Lockout/Tag-outs on appropriate electrical and mechanical devices. Provide and install One (1) Electronic Microprocessor on both Vilter Ammonia Screw Compressors Provide and install new Pressure Transducers, Temperature Probes, and Temperature Wells Provide and install new Optical Drive parts as required by Johnson Control/Frick Provide and replace the existing Analog wiring from above sensors to the Control Panels where required Install operating, alarm, and Failure set-points Calibrate slide valve, slide stop (when applicable), and potentiometer Check operation of Oil Pump Check High Level Safety and other external inputs Run Compressor and check operation of the compressor Work is required to be complete within seven (7) days of this Notice's closing. The single point of contact is 503-378-5928.


Contact Matt M Shoemaker (OAC) at 1 (503) 378-5928

About Oregon Department of Corrections

Attention: This is an opportunity with the Oregon State Department of Corrections. You can find the authoritative listing on ORPIN. Interested in this opportunity? First, read over the opportunity description. If it looks like something your firm can bid on, you can head to ORPIN to express interest and get the full set of bid documents. Here's how you do that.

  1. First, log into ORPIN here. If you're not already in ORPIN, you'll need to register your firm.
  2. Once you're logged into ORPIN, click the "Browse Opportunities" link, and click "Advanced Search". Search for this opportunity number: 291-6326-18
  3. Use ORPIN to express interest in the opportunity. You'll receive an email confirming your interest. You'll also receive future notices about the opportunity.
  4. Questions?

    Contact Matt M Shoemaker (OAC) at 1 (503) 378-5928

You can also follow us on Twitter: @ODOCProcurement